Sigma DP3 Merrill Manuel d'utilisateur télécharger pdf (Page 49)

MANUAL EXPOSURE

Set both the shutter speed and aperture value according to the

indication of the exposure meter. You can change the exposure, as

you desire.

Set the Mode Dial to the

position.

(The shutter speed is illuminated in

orange. The aperture value indicator is

illuminated in green.)

Set the desired aperture value by

rotating the Command Dial.

Set the shutter speed with the

buttons to adjust the value of the

exposure meter to ±0.0.

 The exposure meter can display an

exposure error of up to ± 3 stops from

the correct exposure in

steps. If the

exposure error is more than three stops,

the exposure meter will blink.

Press the shutter button “half-way” to

verify the focus and take the picture.

 It is possible to change the combination of shutter speed and aperture

value as follows.

Shutter Speed Aperture

30s ~ 1/1250s F2.8 ~ F16

1/1600s F4.0 ~ F16

1/2000s F5.6 ~ F16

 When the aperture value is set to an unavailable value by changing the

shutter speed value, the shutter speed value will be changed to an

available value automatically.

 When the shutter speed value is set to an unavailable value by changing

the aperture value, the aperture value will be changed to an available

value automatically.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 129 130

Pas de commentaire

Sigma DP3 Merrill Manuel d'utilisateur Page 49