Sigma SD10 Manuel d'utilisateur télécharger pdf (Page 56)

EXPOSURE COMPENSATION

If you want to intentionally overexpose or underexpose the picture, use this

function.

While pressing the Exposure Compensation

button, turn the “C”-dial to set the desired

compensation value. Then, release the

Exposure Compensation button.

■

The LCD panel will show “ 0.0” when you initially press the exposure

compensation button. The “

” indicates overexposure, and “ ” indicates

underexposure.

■ Exposure compensation can be set in 1/3EV increments from +3.0 to –3.0 stops.

■ For example, if you set +1.0 then the shutter speed will be one stop slower in

Aperture Priority mode. In Shutter Speed Priority mode, the aperture will be

one-stop larger (smaller F-number). In the case of Program mode, the shutter

speed will be 0.5 stop slower and the aperture will increase 0.5 stop.

CAUTION !!

• Once you set the Exposure Compensation, the camera will continuously hold this

mode, until the compensation amount is set to

0.0 value.

• Exposure compensation function cannot be used with Manual Operation mode.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 115 116

Pas de commentaire

Sigma SD10 Manuel d'utilisateur Page 56