Sigma DP1X Manuel d'utilisateur télécharger pdf (Page 46)

MANUAL EXPOSURE

Set both the shutter speed and aperture

value according to the indication of

the exposure meter. You can

change

the exposure, as you desire.

Set the Mode Dial to the

position.

(The shutter speed value is illuminated

in green. The aperture value is illuminated

in orange.)

Select the desired shutter speed

value by using

button.

Set the exposure value to ±0.0 by

using

button.

• The exposure meter can display an

exposure error of up to ± 3 stops from

the correct exposure in

steps. If the

exposure error is more than three stops,

the exposure meter will blink.

Press the shutter button “half-way” to

verify the focus and take the picture.

• It is possible to change the combination of shutter speed and aperture

value as follows.

Shutter Speed Aperture

15s ~ 1/1000s F4.0 ~ F11

1/1250s F5.6 ~ F11

1/1600s F8.0 ~ F11

1/2000s F10 ~ F11

• When the aperture value is set to an unavailable value by changing the

shutter speed value, the shutter speed value will be changed to an

available value automatically.

• When the shutter speed value is set to an unavailable value by changing

the aperture value, the aperture value will be changed to an available

value automatically.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 121 122

Pas de commentaire

Sigma DP1X Manuel d'utilisateur Page 46