! Die ersten 5 mm abschneiden !
67
GB/USA
ROX 8.0
! Die ersten 5 mm abschneiden !
8 IMPORTANT NOTES/TROUBLESHOOTING/FAQ
No speed display
kIs the computer correctly clicked onto
the bracket?
kHave you checked the contacts for
oxidation/corrosion?
kHave you checked the magnet/transmitter
distance (max. 12 mm)?
kHave you checked whether the magnet
is magnetized?
kHave you checked the battery status on
the speed transmitter?
No cadence display
kHave you checked the magnet/transmitter
distance (max. 12 mm)?
kHave you checked whether the magnet
is magnetized?
kHave you checked the battery status on
the transmitter?
No pulse display
kAre the electrodes damp enough?
kHave you checked the battery status?
No display
kHave you checked the battery status on
the SIGMA ROX 8.0?
kIs the battery inserted correctly
(+ facing up)?
kAre the battery contacts ok? They
should be raised approx. 30 degrees.
(If not, bend carefully)?
Wrong speed display
kAre 2 magnets fitted?
kIs the magnet correctly positioned
(parallel to the transmitter and centered
with the transmitter)?
kIs the wheel circumference set correctly?
kIs the transmitter set on the right bicycle
(bicycle I or II)?
Display black/dull
kIs the temperature too high (> 60°C)
or too low (< 0°C)?
No synchronization
kHave you checked the magnet/
transmitter(s) distance?
kIs/are the battery/batteries on
the transmitter(s) empty?
kHave you checked the range on the
respective transmitter?
kWhen using a hub dynamo, please change
the position of the transmitter.
Display “TOO MANY SIGNALS”
kPlease increase the distance to the other
transmitters and press any button.
8.2 TROUBLESHOOTING
Commentaires sur ces manuels