Sigma SD10 Manuel d'instructions télécharger pdf (Page 52)

SETTING THE WHITE BALANCE

TIP

• When a custom white balance setting is successfully captured, "Custom" will

automatically become the selected item in the White Balance menu.

• It will not be possible to capture a custom white balance setting if the "D"-dial is

set to Continuous Shooting

＜＞

, Self Timer

＜＞

, or Mirror Lock-up

＜＞

mode.

• It is recommended that an automatic exposure mode such as

, or

used when capturing a custom white balance setting to ensure proper exposure.

• It may be necessary to set the lens to manual focus (P.45) when capturing a

custom white balance setting since auto focus may not work properly when

photographing low contrast subjects.

SETTING THE SENSITIVITY

（

ISO EQUIVALENCY

）

The photosensitivity of digital cameras is

described in terms of “ISO equivalent” like

silver-halide film cameras. (ISO sensitivity

P.105)

To choose a sensitivity setting, turn the “C”-dial

while depressing the “ISO Button”.

ISO sensitivity can be set to 100, 200, 400, 800.

＊ To check or confirm the ISO sensitivity, depress

the ISO button. The ISO icon and current setting

of the sensitivity value will be displayed on the

top LCD panel.

NOTE

• If extended mode is selected you can use ISO up to 1600（See P.62）

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 115 116

Pas de commentaire

Sigma SD10 Manuel d'instructions Page 52